點擊圖片查看原圖
日本馬沙達千斤頂保養: 1:日本馬沙達千斤頂加油/更換液壓油。 2:日本馬沙達千斤頂將千斤頂置于豎直狀態，泵芯，活塞降至低點。 3:日本馬沙達千斤頂取下外套上的橡膠油塞，注入經慮潔后的液壓油至活塞口為止。 4:日本馬沙達千斤頂在零上5-45攝氏度溫度范圍使用時選用N15機械油(GB443-84)，如在零下5-29攝氏度溫度范圍使用時則換用合成錠子油(GB442-64)。 5:日本馬沙達千斤頂定期檢查，潤滑傳動連桿接處，若不使用時，活塞桿調整螺桿及泵芯應壓下，防銹。 6.日本馬沙達千斤頂盡量避免將其置于潮濕環境下或有酸堿及腐蝕性氣體的場所。
Japan Masada Jack maintenance: 1: Japan Masada Jack refueling / replacement of hydraulic oil. 2: Japan Masada Jack in the vertical state of the jack, the pump core, the piston fell to a low point. 3: Japan Masada Jack to take off the rubber oil plug on the jacket, the injection of the hydraulic oil after cleaning to the piston port. 4: Japan Masada jack used 5-45 degrees Celsius temperature range at zero when using N15 mechanical oil (GB443-84), such as spindle oil in minus 5-29 degrees Celsius temperature range when in use (GB442-64). 5: Japan Masada jack on a regular check, lubrication transmission connecting rod, if not in use, the piston rod adjustment screw and pump core should be pressed, rust. 6 Japan Masada Jack as far as possible to avoid it placed in a humid environment or a place with acid and alkali and corrosive gases.
Shanghai YuYing lifting Machinery Co., Ltd.
Atten: summer 18016070061/15216878467
Tel: 021-67866730
Fax: 021-67715051
E-mail: yyjixie@126.com
E-mail2: zhurong@gks-cn.com
Add: Shanghai city Songjiang District town Jiuting Shenglong Road No. 751 5#402
P.C: 201615
Web：www.yuying-lifting.com
www.cnzhurong.com